Clik here to view.
I'm back.
I haven't posted much to this blog over the last month. In part I was too busy helping to get our garden going while also having to work a lot of overtime at my "day job". I was also away for a couple...
View ArticleClik here to view.
Framing the exterior wall trusses - part 3.
In part 2, I described my approach to installing the secondary studs and the secondary top plate. In part 3 I am getting into how I framed the window and door openings into the secondary structure....
View ArticleClik here to view.
Framing the exterior wall trusses - part 4 - the forgotten parts.
This is essentially the final part of my series of posts detailing the framing of the exterior wall trusses - there may be a few revisits of specific things in the future. Part 4 is a short post on how...
View ArticleClik here to view.
Framing the sunroom - part 1.
The first major goal for the spring of 2012 was to frame the attached sunroom on the south wall of the house. There are a number of factors that led me to build the sunroom in the way that I have...
View ArticleClik here to view.
The cistern - insulation and top access.
Since I still haven't had a chance to draw up the details I promised in "Framing the sunroom - part 1", I thought I'd take a little detour with this post and take another look at the cistern. Since I...
View ArticleClik here to view.
Framing the sunroom - part 1 revisited.
I finally managed to add some sunroom details to the "details" section the other night so I thought it might be helpful to revisit "Framing the sunroom - part 1" and relate the new sketch to some of my...
View ArticleTechnical difficulties...
Just a note to say that I am having some issues with Blogger at the moment. After an unsucessful attempt at uploading a new detail, I managed to lose the other detail I uploaded last week...Problem...
View ArticleClik here to view.
Framing the sunroom - part 1 revisted... again.
In the same vein as my last post, this post is in response to another new detail - at the sunroom [exterior] wall top and bottom plates.There was just a little more I wanted to show regarding one of...
View ArticleClik here to view.
Framing the sunroom - part 2.
In part 1, I layed out the more important design considerations of the sunroom. Now, in part 2, I'll get on with some of the practical aspects. Back in spring, I was putting a "push on" to get the...
View ArticleClik here to view.
Framing the sunroom - part 3.
Carrying on from my last post, this post will cover the remainder of the framing details for the sunroom.Looking east over the roof joists towards the leafless trees of the Slate River Valley in May.In...
View ArticleClik here to view.
So long neoprene.
My last post ended with a photo of some electrical conduit sticking out from a wall. My original plan for air sealing these types of penetrations was going to be to stretch a square of neoprene rubber...
View ArticleClik here to view.
Touchin' base.
I've been having a real tough time keeping up with my blogging duties lately - sorry about that. The good news is, however, that I have been busy making progress on this project. I had the last three...
View ArticleClik here to view.
The joy of insulating.
I've decided to take a break from posting on topics in [quasi] chronological order. To that end, I think I'll get into how I've been insulating the exterior walls of this house. Overall, I've been...
View ArticleClik here to view.
Team Typar!
I mentioned in my last post that one of the "real world" strategic difficulties I've had to deal with is how to go about insulating the wall one portion at a time, sometimes with weeks in between each...
View ArticleClik here to view.
Windows - finally.
Despite the intensity of the experience, there have been very few times where I actually felt any anxiety about any particular aspect of this project. One of those aspects was not having a roof....
View ArticleClik here to view.
Resurrecting some fun from the past.
I was doing some cleaning up on my computer and I came across a couple of old blog posts that I had written for another blog I had started years ago. I never really did much of anything with the old...
View ArticleClik here to view.
"Coolth" storage.
Here in Northwest Ontario, we've had quite a mild fall. About a week or two ago the temperatures started to dip down to something closer to what would normally be expected for this time of year - daily...
View ArticleClik here to view.
The "holidays"... yeesh.
I'm done promising to follow any kind of regular posting schedule. Unfortunately, since this blog is just a sort of "hobby" for me, there are times when I just can't get enough time in to adhere to a...
View ArticleClik here to view.
Another new year... 2013.
Just a quick hello to start off 2013 (before I get called to the table for pancakes). I hope everyone enjoyed their New Year's Eve celebrations and that nobody is suffering too much from any...
View ArticleClik here to view.
Ventilation duct supports.
In an earlier post, I briefly described some ventilation duct supports that I needed to fabricate. I had four supports to make, two for the HRV (one for the intake vent and one for the exhaust vent),...
View Article